New firmware update v1.30 for RICOH GR III

Release of the firmware version 1.20 for RICOH GR III

RICOH IMAGING COMPANY, LTD. wishes to announce the release of Firmware Update Software Version 1.30 for GR III.

 

Changes to V1.30

Add the following enhanced features

• [Cross Processing] has been added to [Image control] of the [6] [Image Process Setting] menu in the [Still Image Settings].
• [Cross Processing] has been added to [Image control] of the [6] [Image Process Setting] menu in the [Movie Settings].
• [Crop] and [Touch AF] can be registered to [ADJ Mode Setting] of the C [2] [Customize Control] menu in the [Customize Settings].
• [Touch AF] can be registered to [Fn Button Setting] of the C [2]  [Customize Control] menu in the [Customize Settings].

For more details click here.

 

Improved Contents

• Improved the AF performance of [Macro Mode] in dark places and low contrast.
• Changed to take over as the initial value after the next time when developing with [JPEG Recorded Pixels] setting changed in RAW development.
• When preparing to shoot with the shutter button, change the point that the electronic level is hidden by the guide display.
• Improved stability for general performance.

 

Caution! Only GRIII users are permitted to download the firmware update!

How to check version

1. Turn ON the camera.
2. Press MENU button.
3. Operate 4-way button and display [About This Device] of [Setup menus]
4. Operate 4-way button and select [Firmware Info / Options] then press 4-way button right.
5. The firmware version for camera is displayed on the [Firmware Info / Options] screen.

 

Preparation of update

• GR III camera body.
• Blank, formatted SD card. (formatted by GR III) (32MB or more)
• Computer with a SD card slot.
  *If the computer does not have a SD card slot, SD card reader/writer is needed.
• Fully charged battery (DB-110) or AC adapter kit K-AC166J.
  *Be sure to use fully charged battery If the camera turns off during updating due to lack of battery power, the camera will become inoperable. If this happens, a charge will be made for repairs even if within the warranty period.

 

Updating Procedure

1. Provide a formatted SD memory card for the update software.
   The download file is self-extracting. The following file is extracted.
   • fwdc239b.bin: This is the updated firmware
     Copy the above Firmware file [fwdc239b.bin] to the root directory in the SD card.
2. Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
3. Insert the update SD card (prepared in step 1) into the camera and close card cover.
4. Turn the camera power on while pressing [Menu] button.
5. [Update the camera firmware] is displayed
   Select [Execute] by 4-way button and press [OK] button.
6. The firmware update will start and [Updating] is displayed.
   *Do not turn OFF the camera while updating.
7. When update is completed, “Update completed” will be displayed
8. Turn OFF the camera and remove the SD card from camera.
   *Confirm the version of firmware with above [How to check version].
   [Caution]
   When updating is finished, the update SD card still contains the Firmware file.
   If you want to use this card to take pictures, format the card by the camera to delete firmware file first.

• Direct download link for Software Updater (Windows/Machintosh) -> v1.30

 

Source